Skip links
Stain Colors Set - HempShield Samples

How to Apply Hemp Shield Stain: Tips and Tricks

Using Hemp Shield Stain is a natural and environmentally safe way to protect wood surfaces from weathering, UV radiation, and other environmental factors. Applying Hemp Shield Stain to a deck, fence, outdoor furniture, or any other wooden structure offers long-lasting protection if applied carefully and efficiently.

Follow the step-by-step guide we have provided below to make sure you apply Hemp Shield stain correctly and get the best possible results.

Step 1: Preparation of the Surface

It is critical to carefully prepare the wood surface before applying Hemp Shield Stain. Clean the wood first to eliminate any dirt, filth, or prior coats. Scrub the surface carefully with a light detergent and a firm brush. Allow the wood to dry fully after properly rinsing it with water.

Step 2: Perform a Small Area Test

A little test on an unnoticeable section of the wood is advised to assure the appropriate color and finish. Apply a tiny amount of Hemp Shield Stain to the wood and wait for it to dry. This phase will assist you in making any necessary changes before proceeding with the entire application.

Step 3: Mix the Stain

To maintain uniform color and dispersion of the natural pigments, carefully stir the Hemp Shield Stain before application. Mix well, especially if the stain has been sitting for a while.

Step 4: Use the Stain

Apply the Hemp Shield Stain evenly and thoroughly on the wood surface with a brush, roller, or sprayer. To avoid the stain from drying too rapidly, work in tiny pieces. To provide complete protection, coat all sides of the wood thoroughly.

Step 5: Allow Time for Drying

Allow the stain to dry according to the manufacturer’s directions after applying it. The drying period will vary based on the weather, humidity, and type of wood. Avoid walking on or around

Step 6: Clear the Area

After using brushes, rollers, or sprayers, promptly clean them with soap and water. Dispose of any remaining stain or packaging in accordance with local rules.

Make sure to keep it away from the reach of children, and in the event of eye contact, immediately wash your eyes with water and reach out to a doctor. In the case of skin contact, wash thoroughly the contacted area with soap and water.

Applying Hemp Shield Stain to your wooden surfaces is a simple and efficient approach to maintaining and improving their appearance. You can obtain a professional finish that will last the test of time by following these step-by-step instructions.